Adopt Multi-actuator drive mode with fast installation and operation. The cost-effective system is stable and efficient and is suitable for large-scale solar plant with multiple field condition adaptation.
• PV string power supply with back up battery
• Wireless communication, less cable consumption
• All-weather shadow avoid strategy
- Multi-Actuator drive with damper in between, significantly reduce resonance
- Linear actuator system, enables up to ±50° tracking
- With high natural frequency, stay stable for high critical wind speed
-Actuator is easy to install that only require one person
- U-shape torque tube higher section bending modulus
- Section purlin design can simplify the installation and strength the structure
Location: Thailand
Location: Thailand
On site video below
|
Electrical Specification |
System Specification |
||
|
Control Mode |
MCU |
Drive mode |
Electrical Linear-Actuator |
|
Tracking Accuracy |
2° |
Foundation Type |
Concrete/Pile Ramming Steel |
|
Protection Level |
IP65 |
Tracking range |
±50° |
|
Working Temperature |
-40℃~85℃ |
Module Layout |
One-in-Portrait (1P) |
|
Power Supply |
PV String Power Supply |
Ground Clearance |
0.5m |
|
Monitoring System |
SCADA (Optional) |
Working Wind Tolerance |
≤18m/s |
|
Communication |
Wireless/Wire Communication |
Max Wind Tolerance |
55m/s(ASCE7-05)
|
Related Tags :
Rail-Free ballasted flat mounting system
The Rail-Free ballasted flat mounting system is our newly developed product for your choice, a south-oriented racking solution for mounting framed modules on flat roofs with 5°，10°mounting tilts.
Steel ground mounting system
The Steel ground mounting system is the most economical ground mounting system for large scale solar plants.
「TAI」Alloy Module Frame
「TAI」 alloy module frame can fix and seal the solar module, enhance the strength of the component, extend the service life, and make the component easier to transport and install.
Railless metal sheet mounting system
The Railless metal sheet mounting system is light, small , cost-effective and easy to mount on trapezoidal metal sheet, allows for easy logistics.
Non penetrating ballast mounting rack
The Non penetrating ballast mounting rack is a ideal solution for use on industrial buildings with low admission additional loads. The system is delivered in compact form to save cost.
Tile roof solar mounting system
The Tile roof solar mounting system is suitable for roofing with pantiles and corrugated fibre cement, with wide range of different roof hook for the best choice.
ANT-Cloud-Multi-Actuator Single-Axis 2P Tracker
Adopt 3/4 actuator drive though transfer bar, stable and reliable, become most cost-effective bifacial solution with shadow avoid design.
Balcony solar mounting system
Balcony solar mounting system provides three-in-one solution for solar panels installed on three different scenarios including balcony, wall and ground.
English
