English
- Single slew-drive design
- Match for bifacial modules
- Match for auto-cleaning robots
Adopt slew-drive, enlarging tracking range. Comparing with fix structure, it’s accurate tracking and can achieve 10%-15% power generation augmented.
• PV string power supply with back up battery
• Wireless communication, less cable consumption
• All-weather shadow avoid strategy
- Single slew-drive design
- Match for bifacial modules
- Match for auto-cleaning robots
- Dampers on both sides, effectively protect the torque tube
-Fewer column for fast installation
- Wide tracking range
Capacity: 6.259MW
Location: Brazil
|
Electrical Specification |
System Specification |
||
|
Control Mode |
MCU |
Drive mode |
Slewing drive |
|
Tracking Accuracy |
2° |
Foundation Type |
Concrete/Pile Ramming Steel |
|
Protection Level |
IP65 |
Tracking range |
±60° |
|
Working Temperature |
-40℃~85℃ |
Module Layout |
One-in-Portrait (1P) |
|
Power Supply |
PV String Power Supply |
Ground Clearance |
0.3m |
|
Monitoring System |
SCADA (Optional) |
Working Wind Tolerance |
≤18m/s |
|
Communication |
Wireless/Wire Communication |
Max Wind Tolerance |
47m/s(ASCE7-05)
|
Angle-adjustable solar mounting system
The Angle-adjustable solar mounting system is designed to be adjusted to different angles for achieve better power generation according to different seasons.
Aluminum Carport Mounting System
The carport solar mounting system provides valuable parking lot shade while generating clean energy for reduced utility costs.
「TAI」Alloy Module Frame
「TAI」 alloy module frame can fix and seal the solar module, enhance the strength of the component, extend the service life, and make the component easier to transport and install.
Steel carport solar mounting system
The Steel carport solar mounting system can achieve heating isolation and waterproof your car parking.
TAI-Universal- Multiple Slew-Drive Single-Axis 2P Tracker
Adopt trio slew-gear motor drive mode which can limit girder distortion risk and ensure stable operation and accurate transmission.
Standing seam roof mounting system
The Standing seam roof mounting system is a headache-free, no roof penetration mounting solution for metal roofs with standing seam design.
Non penetrating ballast mounting rack
The Non penetrating ballast mounting rack is a ideal solution for use on industrial buildings with low admission additional loads. The system is delivered in compact form to save cost.
ANT-Surface-Multi-Actuator Single-Axis 1P Tracker
Adopt Multi-actuator drive mode with fast installation and operation. The cost-effective system is stable and efficient and is suitable for large-scale solar plant with multiple field condition adaptation.
